Welcome to CompressorAndEngine.net, your reference store for al kinds of compressors and engines.

Bestselling Products

 

DuroMax XP7HPE 212cc 7HP Electric Start Gas Powered, 50 State Approved, Multi-Use Engine , Blue

  • 208cc 4 Stroke OHV Engine
  • Large 1 Gallon Fuel Tank
  • Runs on Standard 87 Octane Gasoline
  • Electric Start Key Switch Box
  • Shaft Size: 3/4" Diameter, 2-3/8" Long, 3/16" Keyway
  • Shaft End: 5/16" Size 24 UNF - Drilled and Tapped
 

BILT HARD 7HP 212cc Horizontal Shaft Gas Engine, 4 Stroke OHV Gas Motor with Recoil Start for Go Kart, Mini Bike, Log Splitter and Other Machines, EPA Compliant

  • Wide Application: HILT HARD 7 HP 4-stroke engine, max torque is 8.1 ft.-lbs. @ 2500 RPM and maximum 7 horsepower is an easy-to-install solution for most appliances needs. Great for pressure washers, cement mixers, compressors, mowers, log splitters, vacuums, tillers, water pumps, chipper/shredders, blowers. (engine oil is not include)
  • Super Durable: This tough gas motor features a durable cast iron cylinder that withstands wear and abuse, fuel shut off for safe transport and gas saving overhead valves for a cooler, cleaner performance.
  • Industrial Grade Made: All BILT HARD engines are industrial grade and feature cast-iron sleeves, automotive grade rods, pistons, rings, crankshafts, valve and valve springs. 3,600 RPM engine speed, splash-lubrication system provides efficiency. Easy-reach recoil starter system with auto-decompression.
  • Great Replacement: 3/4" Diameter , 2-3/8" Long, 3/16" Kw, shaft end drilled & tapped with 5/16" 24 UNF, making this gas engine is a great replacement for your Hon-da GX120-118cc, GX160-163cc, GX160-163cc, GX200-196cc, Briggs-Stratton XR750-163cc, XR950-208cc, Koh-ler RH255-196cc, RH265-196cc, CH260-208cc,CH270-208cc, Ya-ma-ha MZ175-171cc, MZ200-192cc, Ka-wa-sa-ki FJ130D-133cc,FJ180D-179cc.
  • Warranty: Noted: Every item will be Oil Tested before packaging, so it may look used or touch a little oily, but 100% new condition. The item is free from defects in materials and workmanship 90 days since purchase. Our support team is on standby for YOU.
 

Briggs & Stratton Intek Series, 19 HP, 540 cc, Single Cylinder Engine

    • 9 amp charging system
    • Full pressure lubrication with oil filter
    • Pulse fuel pump
    • Overhead valve design (OHV) for cooler operation and long valve life
    • Includes exhaust
    • Dura-Bore cast iron cylinder sleeve for extended life
    • 3300 max RPM
    • Electric start
    • For riding lawn mowers
    • Replaces engine model 33R877-0003-G1
 

Predator 6.5 HP 212cc OHV Horizontal Shaft Gas Engine - NOT Certified for California; Fuel Shut Off and Recoil Start

  • Durable cast iron cylinder withstands wear and abuse
  • User-friendly controls for easy starting and operation
  • Recoil start
  • Fuel shut off for safe transport
  • Ball bearing support shaft for long life
 

Sange 49cc 2 Stroke Pull Start Engine Starter Motor for Pocket Bike Mini Dirt Bike ATV Scooter

  • Engine size: 49cc
  • Start mode: hand pull starter
  • Gear System: centrifugal clutch
  • Dimension of engine: 250mm X 220zmm
  • Perfectly fit for pocket bike, mini dirt bike, ATV and scooter
 

Seeutek PK80 80cc Bicycle Engine Kit 2 Stroke Gas Motorized Bike Motor Kit Upgrade with Speedoemter

  • 🚴 80cc Bicycle Engine Kit,Engine Type: Single cylinder,air-cooled,2-stroke.For screw and bolts easily broken, we have upgraded premium quality hex socket screw and bolts to improve the performance.
  • 🚴 Motorized bike kit,Power: 5-6 HP (horse power) stock -Top Speed: 25-35 MPH (miles per hour) stock - Fuel Economy: 100-150 miles per gallon
  • 🚴 Fuel Type:Gasoline 93#;Mixing Ratio of Fuel and engine Oil: 16:1 for new sets breaking time, 25:1 after running 300KM;Please use premium quality oils to prolong engine life. And add some lubricant into the air cylinder before starting.
  • 🚴 Bonus Speedometer as gift,Fits Most 26" Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • 🚴 Notes:The rider needs basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments. If you do not have experience or the first time on installing the motor kit, before installing, please kindly read our instruction and search "80cc bicycle engine kit" on youtube, it will give a big help and troubleshoot a lot of issues during installation process.
 

United Model C6-5 Engine Bulk Pack, Includes 24 Model Rocket Engines

  • Includes 24 rocket engines, 30 model rocket starters, 24 reusable starter plugs and 75 squares of recovery wadding
  • The C6-5 is a standard engine designed for rockets weighing less than 4 oz. and offers more power than both the A3-8 and the B6-4
  • Each engine measures 2.75" (7.0cm) long and has a 0.69" (18mm) diameter
  • PLEASE NOTE: This item will ship by US Postal Service only
  • You MUST HAVE a physical mailbox or Post Office box for delivery
 

Small Engines and Outdoor Power Equipment: A Care & Repair Guide for: Lawn Mowers, Snowblowers & Small Gas-Powered Implements

  • Amazon Kindle Edition
  • Editors of Cool Springs Press (Author)
  • English (Publication Language)
  • 412 Pages - 03/15/2014 (Publication Date) - Cool Springs Press (Publisher)
 

Straight Exhaust vs. H-Pipe vs. X-Pipe!

  • Amazon Prime Video (Video on Demand)
  • English (Playback Language)
  • English (Subtitle)
 

Anbull 80CC Bicycle Engine Kit, Bike Bicycle Motorized 2 Stroke Petrol Gas Motor Engine Kit for 26" 28" Bike (Silver Color)

  • 🚴 2 Stroke 80cc bicycle engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter. (For installation video,pls contact with us via email).
  • 🚴 80CC Motorized Bike Kit :Fits for most 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • 🚴 Lubrication Oil: oil for 2 stroke petrol engine (or oil for 10W/40.10W/30); Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • 🚴 Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • 🚴 Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling; The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
 

Ford 1965 Mustang V8 Engine Model Kit - Working Model Motor with Collector's Handbook

  • 1:3 scale model high performance type-K-code 1965 Ford Mustang V8 engine - 200-part model engine kit - No glue required assembly - this working model car engine is a great example of a classic v8 American muscle car engine from the 60's
  • Sound module with first gen Ford Mustang V8 engine sound - model engine kit includes detailed instructions - build a classic car model engine - this car model for adults is the perfect educational gift for any car lover or gearhead -
  • Transparent engine model – see through model with moving parts, spinning fan and light up sparkplugs - watch all the parts of this scale model motor move while listening to the original Ford Mustang engine sound recording from an actual firstFirst generation Ford Mustang Engine - See the red LED sparkplugs light up in the running motor model as the crankshaft turns and the fan spins - motor model assembly only takes a couple hours
  • Complete with exclusive collector’s manual with Ford archive material and model history - detailed instructions and Ford Mustang history - all about the first generation Mustang - learn all about this classic American muscle car as you build the working model engine kit
  • German (Publication Language)
 

Dyno Proven: 50 HP With One Bolt-On! Engine Masters Ep. 1

  • Amazon Prime Video (Video on Demand)
  • English (Playback Language)
  • English (Subtitle)
 

Trends UK Haynes Build Your Own V8 Engine

  • Includes over 100 parts
  • Motorized model simulates real motor
  • Features ignition and engine sounds and light up spark plugs
  • For ages 14 and up
 

Engine Ice 1/2 Gallon

  • Does not contain Ethylene Glycol
  • Does not contain a bittering agent
  • Formulated with Propylene Glycol
 

Playz V8 Combustion Engine Model Building Kit STEM Hobby Toy for Kids & Adults with DIY Guide & Realistic Parts Including Timing Belt, Cylinder Heads, Spark Plugs, Pistons, Ignition Wires, and More

  • βœ” LET YOUR CHILDREN GET HANDS ON with the Playz Kids DIY Toy V8 Combustion Engine Models Kit THAT WORKS! This mini replica of a classic four cycle 8 cylinder internal combustion gasoline car engine teaches young minds all about the wonderful world of mechanical engineering in one immersive set that makes the perfect hobbies gift set for adults or kids.
  • βœ” INCLUDES EVERYTHING NEEDED TO BUILD: Your child will have a great time building this comprehensive model engine toy! Tinker with the cranks, pulleys, belts, and exhaust valves to make this little gadget come to life right in front of their eyes!
  • βœ” REALISTIC MODEL THAT WORKS: Deliver the action of a classic car engine thanks to the powerful pistons and interactive cables! Simply plug the cables to the battery pack distributor and watch the engine fans turn around with real engine sounds.
  • βœ” DEVELOP THEIR CRITICAL THINKING SKILLS: Playz Kids DIY Toy V8 Combustion Engine Model Kit will encourage young boys and girls to expand their creativity, think logically, and even refine their motor skills all at once!
  • βœ” MAKE THE WORLD OF STEM AMAZING for your children with this intuitive and engaging kit! It makes science, mechanical engineering, and even technology exciting from start to finish! (Requires 3x AA Batteries not included)
 

Liqui Moly 2037 Pro-Line Engine Flush - 500 Milliliters

  • Easy way to clean and flush the oil systems of gasoline and diesel engines
  • Gentle and rapid cleaning
  • Neutral to seals and other materials installed in the engine
  • Compatible with catalytic converters
  • Simple to use
 

BIG RED T26801 Torin Steel Rotating Engine Stand with 360 Degree Rotating Head and Folding Frame: 3/4 Ton (1,500 lb) Capacity, Red

  • Rotating engine stand is constructed with heavy-duty steel, providing long term durability with an industrial luster; An extra-wide base provides maximum stability
  • Mounting head features (4) adjustable arms and 360-degree rotation, allowing for easy access to any part of the engine; Securely holds most foreign and domestic engine blocks
  • Engine stand features a 3/4 ton (1,500 lb) load capacity and is equipped with (2) fixed casters and (3) 360-degree swivel casters for smooth maneuverability
  • Quick folding mechanism allows for saving space when not in use during storage in your garage or workshop
  • Powder coated finish helps deliver rust resistance; Includes a 1 year limited manufacturer warranty
 

Estes A8-3 Engine Pack (3-Each)

  • A8-3 Engines, 3 - Starters, 4 - Starter Plugs
  • This engine is a standard engine designed for flights in rockets weighing less than 3 ounces, including the engine
  • Single stage engine
 

BIG RED T32100 Torin Engine Hoist Shop Crane Accessory: Steel 3 Position Engine Leveler with Adjustable Handle, 3/4 Ton (1,500 lb) Capacity, Red

  • Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel; It's ideal for garage, workshop, and agricultural jobs
  • Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations
  • Features (4) 14" length chains, each equipped with an L-bracket assembly
  • Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease
  • Heavy duty engine leveler easily changes center of gravity, saving time and labor; Includes a 1 year limited manufacturer warranty
 

The Engine 2 Cookbook: More than 130 Lip-Smacking, Rib-Sticking, Body-Slimming Recipes to Live Plant-Strong

  • Esselstyn, Rip (Author)
  • English (Publication Language)
  • 288 Pages - 01/05/2021 (Publication Date) - Grand Central Publishing (Publisher)